LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2002 >> 4Runner Base >> Repair and Diagnosis >> General Information >> Steering >> Service Specifications - Steering >> Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Specifications - Steering: Specifications

Service Data

DRIVE BELT
Drive belt tension New belt 135--180 lbf
Drive belt tension Used belt 85--120 lbf
POWER STEERING FLUID
Oil level rise Maximum 5 mm (0.20 in.)
Oil pressure at idle speed with valve closed Minimum 8,336 kPa (85 kgf/cm2 ,1,209 psi)
STEERING WHEEL
Steering wheel freeplay Maximum 30 mm (1.18 in.)
Steering effort at idle speed Reference: 4.9 N.m (50 kgf.cm, 43 in..lbf)
PS VANE PUMP
Pump rotating torque Maximum 0.27 N.m (2.8 kgf.cm, 2.4 in..lbf) or less
Pump shaft and front housing bushing oil clearance STD 0.03--0.05 mm (0.0012--0.0020 in.)
Pump shaft and front housing bushing oil clearance Maximum 0.07 mm (0.0028 in.)
Vane plate height Minimum 8.6 mm (0.339 in.)
Vane plate thickness Minimum 1.397 mm (0.0550 in.)
Vane plate length Minimum 14.991 mm (0.5902 in.)
Vane plate and pump rotor groove clearance Maximum 0.035 mm (0.0014 in.)
Vane plate length Pump rotor and cam ring mark  
  None 14.999 -- 15.001 mm (0.59051 -- 0.59059 in.)
  1 14.997 -- 14.999 mm (0.59043 -- 0.59051 in.)
  2 14.995 -- 14.997 mm (0.59035 -- 0.59043 in.)
  3 14.993 -- 14.995 mm (0.59027 -- 0.59035 in.)
  4 14.991 -- 14.993 mm (0.59020 -- 0.59027 in.)
Flow control valve spring length Minimum 33.2 mm (1.307 in.)
PS GEAR
Steering rack runout Maximum 0.03 mm (0.0118 in.)
Total preload Turning 0.5 -- 1.7 N.m (4.7 -- 17.2 kgf.cm, 4.1 -- 14.9 in..lbf)
Torque Specifications

Part tightened N.m kgf.cm ft.lbf
NON-TILT AND TILT STEERING COLUMN
Steering wheel set nut 50 510 37
Steering wheel pad set screw (Tone screw) 8.8 90 78 in..lbf
Steering column assembly set nut 26 260 19
Main shaft assembly x Universal joint No. 2 35 360 26
Universal joint No. 2 x Intermadiate shaft No. 2 35 360 26
Control valve shaft x Intermediate shaft No. 2 35 360 26
Column hole cover No. 2 x Column hole cover x Body 8.0 80 69 in..lbf
Tilt lever retainer set bolt Tilt steering column 20 200 14
PS VANE PUMP
Union bolt x Pressure feed tube 47 475 34
Pressure port union x Pump housing 83 850 61
Bracket x Pump assembly 43 440 32
Oil reservoir set bolt Front 13 130 9
  Rear 24 240 17
Vane pump pulley set nut 43 440 32
Front housing x Rear housing 24 240 17
Vane pump assembly with bracket set bolt and nut 43 440 32
Oil pressure switch x Pressure feed tube 21 210 15
PS GEAR
Cylinder end stopper 58 (78) (1) 590 (800) (1) 43 (58) (1)
Bearing guide nut x Control valve housing 25 250 18
Control valve housing set bolt 18 180 13
Rack guide spring cap lock nut 51 (69) (1) 520 (700) (1) 38 (51) (1)
Rack x Rack end 76 (103) (1) 770 (1,050) (1) 56 (76) (1)
Tie rod end lock nut 55 560 41
Turn pressure tube union nut 23 (25) (1) 230 (250) (1) 17 (18) (1)
PS gear assembly set bolt 165 1,700 123
PS gear assembly set bolt and nut 190 1,950 141
Bracket x Body 165 1,700 123
Pressure feed tube x Control valve housing 41 (45) 420 (460) 30 (33)
Return tube x Control valve housing 45 (49) 460 (500) 33 (36)
Universal joint No. 2 x Intermediate shaft No. 2 35 360 26
Control valve shaft x Intermediate shaft No. 2 35 360 26
Steering wheel set nut 34 350 25
Stabilizer bar link set nut Upper 19 190 14
  Lower 69 700 51
Stabilizer bar Bracket set bolt and nut 25 260 19
Tie rod end x Lower arm 91 930 67
(1) For use without SST
scientia non olet · About LEMON Manuals