LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2002 >> 4Runner Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Echo >> Procedures >> Rear Wheel Alignment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Wheel Alignment

  1. Measure vehicle height (see   MEASURE VEHICLE HEIGHT )  .
    NOTE: Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
  2. Inspect camber  .
    1. Camber:
      Fig 1: Identifying Camber Specifications
      G01101210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the measured value is not within the specified value, inspect the suspension parts for damage and/or wear and replace them if necessary because camber is not adjustable.

  3. Inspect toe-in  .
      Fig 2: Identifying Toe-In Measurements
      G01101212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Toe-in:
      Fig 3: Identifying Toe-In Specifications
      G01101211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the toe-in is not within the specified value, inspect and replace the suspension parts as necessary.

scientia non olet · About LEMON Manuals