October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Lexus IS300
- Disconnect the solenoid connector. Using an ohmmeter, measure the resistance between terminals. See Fig 1. Resistance should be 12-17 ohms. If resistance value is not as specified, replace the solenoid. See KEY INTERLOCK SOLENOID under REMOVAL & INSTALLATION.
- Momentarily apply battery positive voltage to terminal KLS+ and ground terminal KLS-. See Fig 1. Ensure an operating noise can be heard from the solenoid. If the solenoid does not operate, replace the solenoid. See KEY INTERLOCK SOLENOID under REMOVAL & INSTALLATION.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002