LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2002 >> RAV4 Base, AWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System Self-Diagnostics) >> Diagnostic Tests >> DTC P0340: Camshaft Position Sensor Circuit >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

WARNING: This page is about a different car, the 2002 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft Position (CMP) sensor (G2 signal) consist of a signal plate mounted on intake camshaft and a pick-up coil. G2 signal plate has 3 teeth on its outer circumference. DTC is set when no cranking or engine running signal is received by ECM from CMP sensor. Possible causes are:

scientia non olet · About LEMON Manuals