Diagnosis & Repair
WARNING: This page is about a different car, the 2002 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Disconnect throttle control motor Gray, 4-pin harness connector. Measure resistance between terminals No. 1 (Red wire) and No. 2 (Green wire) at throttle control motor (component side). Resistance should be .3-100.0 ohms at 68°F (20°C). If resistance is as specified, go to next step. If resistance is not as specified, replace throttle control motor.
- Remove air inlet hose from throttle body. Visually inspect throttle body for carbon build-up or foreign material holding throttle valve open. If problem exists, repair as necessary. If problem does not exist, replace throttle body.