Steering Column: Reassembly

WARNING: This page is about a different car, the 2002 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When using a vise, do not overtighten it.

Install column upper bracket and column upper clamp :
1. Install the column upper bracket and column upper clamp with the 2 new tapered-head bolts.
2. Tighten the new tapered-head bolts until the bolt heads break off.
W/key cylinder lamp: Install the key cylinder lamp assembly with the clip.

Fig 1: Locating Tapered-Head Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002