October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Charging System - Generators & Regulators: Generator: Replacement
- REPLACE FRONT BEARING
- Remove the 4 screws and bearing retainer.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Using SST and a press, press out the bearing.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- SST 09950-60010 (09951-00350), 09950-70010 (09951-07100)
- Using SST and a press, press in a new bearing.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- SST 09950-60010 (09951-00530), 09950-70010 (09951-07100)
- Install the bearing retainer with the 4 screws.
- Torque: 3.0 N.m (31 kgf.cm, 27 in..lbf)
- REPLACE REAR BEARING
- Using SST, remove the bearing cover (outside) and bearing.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- SST 09821-00021
NOTE:
Be careful not to damage the fan.
- Remove the bearing cover (inside).
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Place the bearing cover (inside) on the rotor.
- Using SST and a press, press in a new bearing.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- SST 09820-00031
- Using SST, push in the bearing cover (outside).
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- SST 09825-76010