LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2002 >> Sequoia SR5, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Crankshaft Position Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Removal

  1. Remove engine under cover  .
  2. Remove crankshaft position sensor  :
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and crankshaft position sensor.
    Fig 1: Locating Crankshaft Position Sensor Bolt
    G01128564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals