Camry (Jan. 2003 & Later Production)

For starter signal circuit inspection and wiring diagram, see Figure, Figure, Fig 1-Fig 4 . Before replacing ECM, check ECM connectors and ground circuits. See ENGINE CONTROL MODULE POWER & GROUND CIRCUITS  under COMPUTERIZED ENGINE CONTROLS.

Fig 1: Starter Signal Circuit Inspection Using Hand-Held Tester - Steps 1-3 (Camry)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Starter Signal Circuit Inspection Using Hand-Held Tester - Steps 4-5 (Camry)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Starter Signal Circuit Inspection Using OBD II Scan Tool - Steps 1-3 (Camry)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Starter Signal Circuit Inspection Using OBD II Scan Tool - Steps 4-5 (Camry)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002