Cylinder Block
WARNING: This page is about a different car, the 2002 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK
| Application | In. (mm) | |||
|---|---|---|---|---|
| Cylinder Bore | ||||
| Standard Diameter | 3.1102-3.1107 (79.000-79.013) | |||
| Main Bearing Bore Inside Diameter (1) | ||||
| Size Mark "0" | 2.0472-2.0473 (52.000-52.003) | |||
| Size Mark "1" | 2.0473-2.0474 (52.003-52.005) | |||
| Size Mark "2" | 2.0474-2.0475 (52.005-52.007) | |||
| Size Mark "3" | 2.0475-2.0476 (52.007-52.010) | |||
| Size Mark "4" | 2.0476-2.0477 (52.010-52.012) | |||
| Size Mark "5" | 2.0477-2.0478 (52.012-52.014) | |||
| Size Mark "6" | 2.0478-2.0479 (52.014-52.016) | |||
| Maximum Deck Surface Warpage | .0020 (.050) | |||
|
||||