LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Ignition System >> Ignition Timing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Timing

IGNITION TIMING (Degrees BTDC @ Idle - 4-CYLINDER) (1)

Application Base Timing ECM Controlled Timing
2.4L 4-Cyl. (2) 8-12 (3) 5-15
(1) Check with engine at normal operating temperature, transaxle/transmission in Neutral, parking brake applied, and A/C and all accessories off.
(2) With Jumper Wire (SST 09843-18020 or SST 09843-18040) installed between terminals No. 4 (CG) and 13 (TC) on data link connector No. 3.
(3) With jumper wire removed from data link connector No. 3.
IGNITION TIMING (Degrees BTDC @ Idle - V6) (1)

Application Base Timing ECM Controlled Timing
3.0L V6 (2) 8-12 (3) 7-24
(1) Check with engine at normal operating temperature, transaxle/transmission in Neutral, parking brake applied, and A/C and all accessories off.
(2) With Jumper Wire (SST 09843-18020 or SST 09843-18040) installed between terminals CG and TC on data link connector No. 3.
(3) With jumper wire removed from data link connector No. 3.
scientia non olet · About LEMON Manuals