Torque Specification
CHARGING TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Bearing retainer x Drive end frame | 2.6 | 27 | 23 in.lbf |
| Rectifier end frame x Drive end frame | 5.8 | 59 | 51 in.lbf |
| Generator pulley x Rotor | 110.3 | 1,125 | 81 |
| Brush holder x Rectifier end frame | 1.8 | 18 | 16 in.lbf |
| End cover x Rectifier end frame | 4.6 | 47 | 41 in.lbf |
| Rear end cover x Rectifier end frame | 4.6 | 47 | 41 in.lbf |
| Generator x Cylinder block Bolt | 39 | 400 | 29 |
| Nut 10-mm | 39 | 440 | 29 |
| Nut 8-mm | 15.5 | 158 | 11 |