Wheel Alignment Specifications & Adjustment Procedures: Specifications
Front & Rear Wheel Alignment Specifications (MR2)
| Cold tire inflation pressure | 185/55R15 81V | Front | 180 kPa (1.8 kgf/cm2 , 26 psi) | ||||
| 215/45R16 86W | Rear | 220 kPa (2.2 kgf/cm2 , 32 psi) | |||||
| Front wheel alignment | Vehicle height | Front(1) | 192.4 mm (7.57 in.) | ||||
| Rear(2) | 266 mm (10.47 in.) | ||||||
| Camber | -0°48' ± 45' (-0.80° ± 0.75°) | ||||||
| Right-left error | 45' (0.75°) or less | ||||||
| Caster | 3°05' ± 45' (3.08° ± 0.75°) | ||||||
| Right-left error | 45' (0.75°) or less | ||||||
| Steering axis inclination | 14°55' ± 45' (14.92° ± 0.75°) | ||||||
| Right-left error | 45' (0.75°) or less | ||||||
| Toe-in (total) | 0°09' ± 12' (0.15° ± 0.2°, 1.5 ± 2 mm, 0.06 ± 0.08 in.) | ||||||
| Rack end length difference | 1.5 mm (0.059 in.) or less | ||||||
| Wheel angle | Inside wheel | 38°00' ± 2° (38.00° ± 2°) | |||||
| Outside wheel: Reference | 32°56' (32.93°) | ||||||
| Rear wheel alignment | Camber | -1°05' ± 45' (-1.08° ± 0.75°) | |||||
| Right-left error | 45' (0.75°) or less | ||||||
| Toe-in (total) | 0°18' ± 12' (0.3° ± 0.2°, 3 ± 2 mm, 0.12 ± 0.08 in.) | ||||||
| Right-left error | 0.3 mm (0.012 in.) or less | ||||||
| Front axle | Axle bearing backlash | Maximum | 0.05 mm (0.0020 in.) | ||||
| Axle hub deviation | Maximum | 0.07 mm (0.0028 in.) | |||||
| Front suspension | Lower ball joint turning torque | 0.59 - 3.43 N.m (6 - 35 kgf.cm, 5.2 - 30 in..lbf) | |||||
| Stabilizer bar link ball joint turning torque | 0.05 - 1.0 N.m (0.5 - 10 kgf.cm, 0.4 - 8.7 in..lbf) | ||||||
| Rear axle | Axle bearing backlash | Maximum | 0.05 mm (0.0020 in.) | ||||
| Axle hub deviation | Maximum | 0.07 mm (0.0028 in.) | |||||
| Rear drive shaft | Drive shaft standard length | RH | 814.1 ± 5.0 mm (32.051 ± 0.197 in.) | ||||
| LH | 570.4 ± 5.0 mm (22.457 ± 0.197 in.) | ||||||
| Rear suspension | Stabilizer bar link ball joint turning torque | 0.05-1.0 N.m (0.5-10 kgf.cm, 0.4-8.7 in..lbf) | |||||
Measure the distance from the ground to the center of the front side lower suspension arm mounting bolt.
Measure the distance from the ground to the center of the front side strut rod mounting bolt. |
|||||||