LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (Engine Immobilizer System - Diagnostics) >> Circuit Inspection >> Code 13: is not output >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check ignition switch (See  INSPECTION  ). 
    1. NG : Replace ignition switch. 
    2. OK : Go to Next Step 
  2. Check harness and connector between ignition switch and transponder key ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace harness or connector. 
    2. OK : Check and replace transponder key ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
scientia non olet · About LEMON Manuals