Section 4 (Cruise Control Systems - 2ZZ-GE): Troubleshooting: Notes
WARNING: This page is about a different variant/trim than selected.
- Vehicle brought to workshop.
- See CUSTOMER PROBLEM ANALYSIS .
- See CHECK AND CLEAR DTC .
- Problem symptom confirmation.
Symptom does not occur (go to step 4).
Symptom occur (go to step 6).
- See SYMPTOM SIMULATION .
- See DTC CHECK
Malfunction code (go to step 7)
Normal code (go to step 5)
- DTC CHART
Go to step 6.
- See PROBLEM SYMPTOMS TABLE .
- See CIRCUIT INSPECTION .
- Identification of problem.
- Parts inspection.
- Repair.
- Confirmation test.
End.