Power Point Socket Assembly: Replacement

NOTE: COMPONENTS: See COMPONENTS

REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSY (M/T TRANSAXLE) (See REPLACEMENT )
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CTR (See REPLACEMENT )
REMOVE CONSOLE BOX ASSY REAR (See REPLACEMENT )
REMOVE POWER POINT SOCKET ASSY
1. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power point socket cover, and push out the socket to the room side.
  
  Fig 1: Removing Power Point Socket Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Align the socket with the notch on the power point socket cover, remove the power point socket assy to the room side.
INSTALL POWER POINT SOCKET ASSY

Fig 2: Installing Power Point Socket Assy
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Align the socket with the notch on the power point socket cover, push the power point socket assy into as hard as possible and install it.
INSTALL CONSOLE BOX ASSY REAR (See REPLACEMENT )