LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing - 4-Cylinder >> Fuel Systems >> Fuel Control >> Fuel Cut System (Camry Solara, Celica, ECHO, MR2, RAV4 & Tacoma)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Cut System (Camry Solara, Celica, ECHO, MR2, RAV4 & Tacoma)

  1. Connect Toyota hand-held tester or scan tool to data link connector No. 3 located at driver's side of instrument panel. See Figure-Figure . Hand-held tester or scan tool is used to read engine RPM. Start engine and warm engine to normal operating temperature.
  2. Ensure A/C is off. Gradually increase engine speed to 3500 RPM. Using stethoscope, check for fuel injector operating sound. Ensure when throttle lever is released, fuel injector stops operating momentarily and then resumes operating (fuel return RPM).
  3. Ensure fuel return RPM is within specification. See FUEL CUT SYSTEM SPECIFICATIONS  table. Shut engine off. Remove hand-held tester or scan tool.
FUEL CUT SYSTEM SPECIFICATIONS (1)

Application Fuel Return RPM
Camry Solara
A/T 1500
M/T 1200
Celica, ECHO, MR2 & RAV4 1400
Tacoma
A/T 1500
M/T 1400
(1) Check with engine at normal operating temperature and A/C off.
scientia non olet · About LEMON Manuals