DTC P1300, DTC P1305, DTC P1310 & DTC P1315: Notes
WARNING: This page is about a different car, the 2003 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
Code Definition
- DTC P1300: Ignitor No. 1 Circuit
- DTC P1305: Ignitor No. 2 Circuit
- DTC P1310: Ignitor No. 3 Circuit
- DTC P1315: Ignitor No. 4 Circuit
WARNING:
Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS .
CAUTION:
If Engine Control Module (ECM) replacement is instructed in following test, always ensure ECM connectors and ground circuits are okay. If either are defective, repair and repeat testing to confirm ECM malfunction. On models equipped with engine immobilizer, if ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - TOYOTA
article in GENERAL INFORMATION, or appropriate ENGINE IMMOBILIZER SYSTEMS article in ACCESSORIES & EQUIPMENT.