LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Controls - System & Component Testing - V6 & V8) >> Idle Control Systems >> Throttle Body >> Sequoia
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body: Sequoia

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

For throttle body inspection procedure, see Fig 1 and Fig 2 . To inspect accelerator position sensor wiring, see ACCELERATOR PEDAL POSITION SENSOR  under ENGINE SENSORS & SWITCHES. To inspect throttle position sensor, see THROTTLE POSITION SENSOR  under ENGINE SENSORS & SWITCHES. To remove throttle body, see THROTTLE BODY under FUEL SYSTEMS in REMOVAL & INSTALLATION - V6 & V8.

Fig 1: Inspecting Throttle Body - 1 of 2 (Sequoia)
G00251097Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Inspecting Throttle Body - 2 of 2 (Sequoia)
G00251098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002