LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System Self-Diagnostics - V6) >> Diagnostic Tests >> DTC P0335 Or DTC P1335: Crankshaft Position Sensor Circuit >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

WARNING: This page is about a different car, the 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Crankshaft Position (CKP) sensor is a pick-up coil mounted next to crankshaft pulley. A 34-tooth signal plate is mounted to crankshaft. DTC P0335 is set if no CKP sensor signal is received by ECM during cranking, or no CKP sensor signal is received by ECM with engine speed at 600 RPM or more. DTC P1335 is set if no CKP sensor signal is received by ECM with engine speed at 1000 RPM or more. Possible causes are:

scientia non olet · About LEMON Manuals