Circuit Description
WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
Mass Airflow (MAF) meter uses a platinum hot wire which is maintained at a constant temperature by controlling the current flow through the hot wire. Current flow is then measured as an output voltage. MAF meter may also be referred to as airflow meter. DTC is set when ECM detects an open or short in MAF meter circuit for more than 3 seconds. Possible causes are:
- MAF meter circuit is open or shorted.
- Defective MAF meter.
- Defective ECM.