Diagnosis & Repair
WARNING: This page is about a different car, the 2003 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Using Toyota hand-held tester or scan tool, read FREEZE FRAME data. Freeze frame data records engine conditions when malfunction is detected.
- Using Toyota hand-held tester or scan tool, check for any other DTCs. If only DTCs P0116 and/or P0125 exists, go to next step. If other DTCs exist, diagnose and repair those DTCs first and retest.
- Remove and inspect cooling system thermostat for damage and proper operation. Thermostat is located behind thermostat housing on driver's side front of engine, just behind cooling fan. If thermostat is defective, replace thermostat. If thermostat is okay, replace ECT sensor. ECT sensor is located behind upper timing belt cover, on top of intake manifold and contains Dark Gray 2-pin electrical connector with Brown and Black/Blue wires. For removal and installation of components, see REMOVAL & INSTALLATION - V6 & V8 article.