LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System & Component Testing - 4-Cylinder) >> Modules, Motors, Relays & Solenoids >> IG2 Relay >> RAV4
April 5, 2026: LEMON Manuals is launched! Read the announcement.

IG2 Relay: RAV4

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove IG2 relay from relay box located at driver's side front corner of engine compartment. See Figure.
  2. To test IG2 relay continuity, using ohmmeter, check for continuity and no continuity between specified terminals on IG2 relay. See Fig 1.
  3. To test IG2 relay operation, apply battery voltage and ground to IG2 relay. Using ohmmeter, check for continuity between specified terminals on IG2 relay. See Fig 1. Replace IG2 relay if defective.
    Fig 1: Testing IG2 Relay (MR2 & RAV4)
    G97C06258Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals