LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Daytime Running Light No. 2 & 4 Relay Circuit >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check D.R.L. relay No. 2 and 4 (See  INSPECT D.R.L. RELAY CIRCUIT  ). 
    1. NG  : Replace the D.R.L. relay No. 2 and 4.
    2. OK  : Go to step  2.
  2. Check wire harness and connector between D.R.L. relay and Body ECU, battery and D.R.L. relay  . See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS .
    1. NG  : Repair or replace wire harness or connector.
    2. OK  : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .
scientia non olet · About LEMON Manuals