Inspection Procedure
WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- Check the power window switch
. See step 2
of
INSPECTION
.
- NG : Replace the power window switch.
- OK : Go to step 2.
- Check wire harness and connector between power window switch and Body ECU
. See
HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS
.
- NG : Repair or replace wire harness or connector.
- OK : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .