License Plate Lamp Assembly: Replacement
WARNING: This page is about a different car, the 2004 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE BACK DOOR TRIM BOARD ASSY (See OVERHAUL )
- REMOVE BACK DOOR OUTSIDE HANDLE (See OVERHAUL )
- REMOVE BACK DOOR LOCK CYLINDER & KEY SET (See OVERHAUL )
- REMOVE BACK DOOR GARNISH SUB-ASSY OUTSIDE (See OVERHAUL )
- REMOVE LICENSE PLATE LAMP ASSY
- Pull the license plate light assy to the side of vehicle as shown in Fig 1 and release the claw.
- Disconnect the connector and remove the license plate light assy.