Rear Combination Lamp Assembly LH: Replacement

WARNING: This page is about a different car, the 2004 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR COMBINATION LAMP ASSY LH
1. Remove the service hole cover LH.
2. Disconnect the connector and remove the 3 nuts.
  
  Fig 1: Removing Rear Combination Lamp Assy LH Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Pull out the rear combination light assy LH to the back of the vehicle, and remove.
  
  Fig 2: Locating Rear Combination Light Assy LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002