Lexus IS300
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the solenoid connector. Using an ohmmeter, measure the resistance between terminals. See Fig 1. Resistance should be 12-17 ohms. If resistance value is not as specified, replace the solenoid. See KEY INTERLOCK SOLENOID under REMOVAL & INSTALLATION.
- Momentarily apply battery positive voltage to terminal KLS+ and ground terminal KLS-. See Fig 1. Ensure an operating noise can be heard from the solenoid. If the solenoid does not operate, replace the solenoid. See KEY INTERLOCK SOLENOID under REMOVAL & INSTALLATION.