LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 16 (Engine Control System Self-Diagnostics) >> Diagnostic Tests >> DTC P1780: Park/Neutral Position Switch Circuit >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

Park/Neutral Position (PNP) switch delivers input signals to ECM. Input signals are used for air/fuel correction and for idle speed control. DTC is set when 2 or more switches are on simultaneously for "P", "R", "N", "2" and "L" position or when ECM is receiving an ON signal from PNP switch when vehicle is being operated for more than 30 seconds at 44 MPH or more with engine speed of 1500-2500 RPM. Possible causes are:

scientia non olet · About LEMON Manuals