Fail-Safe Mode Chart
WARNING: This page is about a different car, the 2003 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
The ECM enters the fail-safe mode if any of the following codes are recorded, see IDENTIFYING FAIL-SAFE MODE CHART table.
IDENTIFYING FAIL-SAFE MODE CHART
| DTC No. | Fail-Safe Operation | Fail-Safe Deactivation Conditions |
|---|---|---|
| P0031, P0032, P0037 & P0038 | The Heater In Which An Abnormality Is Detected Is Turned Off | Ignition Switch OFF |
| P0100, P0102 & P0103 | Ignition Timing Is Fixed At 5° BTDC | Returned To Normal Condition |
| P0110, P0112 & P0113 | Intake Air Temperature Is Fixed At 68° F (20° C) | Returned To Normal Condition |
| P0115, P0117 & P0118 | Engine Coolant Temperature Is Fixed At 176° F (80° C) | Returned To Normal Condition |
| P0325 | Max. Timing Retardation | Ignition Switch OFF |
| P0351-P0354 | Fuel Cut | IGF Signal Is Detected For 2 Consecutive Ignitions |
| P2195 & P2196 | The Heater Circuit In Which An Abnormality Is Detected Is Turned Off | Ignition Switch OFF |