Section 353 (Body Control Systems - Diagnostics): Pre-Check
WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- DATA LIST NOTE: According to the DATA LIST displayed by the hand-held tester, you can read the value of the switch, sensor, actuator and so on without parts removal. Reading the DATA LIST as a first step of troubleshooting is one of the method to shorten the labor time.
- Connect the hand-held tester to the DLC3.
- Turn the ignition switch ON.
- According to the display on tester, read the "DATA LIST".
DATA LISTDescription Tester display Check condition Key Unlock Warning Switch KEY UNLK WRN SW OFF/ON Parking Brake Switch PARKNG BRAKE SW OFF/ON Stop Light Switch STOP LIGHT SW OFF/ON Hood Courtesy Switch HOOD COURTSY SW OFF/ON Auto Light Switch AUTO LIGHT SW OFF/ON Head Light Switch (Head) HEAD LIGHT SW OFF/ON Head Light Switch (Tail) TAIL LIGHT SW OFF/ON Illumination Rate Information ILLUMINATE RATE min.=0, max.=99.99 Wireless Door Lock Control Function WIRELESS OPER OFF/ON Open Door Warning OPEN DOOR WARN OFF/ON Auto Lock Time AUTO LOCK DELAY OFF/ON 2 Times Operation Wireless Unlock UNLOCK/2 OPER OFF/ON Light ON By Unlocking W/Transmitter INT/LGT ON/UNLK OFF/ON Panic Function ALARM FUNCTION OFF/ON Auto Lock AUTO LOCK OFF/ON Unlock W/ 2 Times D Key Operation UNLK/KEY TWICE OFF/ON Lock W/Shift P-Except P Brake Release LOCK SHIFT BRKE OFF/ON Warning Operation Time WARNING TIME 5.0 s/15.0 s/27.5 s/60.0 s Passive Mode (Security System) PASSIVE MODE OFF/ON Warning By Glass Broken Sensor WARN BY GLS SEN OFF/ON Entry Delay ENTRY DELAY 0s/14s/30s Interior Light On W/Door Key Unlock I/L ON/UNLOCK OFF/ON Lighting Time LIGHTING TIME 7.5s/15 s30 s Turn On Luminous Intensity SENSITIVITY DARK2/DARK1/NORMAL/LIGHT1/LIGHT2 Light Auto OFF Delay LIGHT OFF DELAY OFF/30 s/60 s/90 s - ACTIVE TEST COMBINATION METER: NOTE: Performing the ACTIVE TEST using the hand-held tester allows the relay, VSC, actuator and so on to operate without parts removal. Performing the ACTIVE TEST as a first step of troubleshooting is one of the method to shorten the labor time.
It is possible to display the DATE LIST during the ACTIVE TEST.
- Connect the hand-held tester to the DLC3.
- Turn the ignition switch ON.
- According to the display on tester, perform the "ACTIVE TEST".
ACTIVE TESTDescription Tester display Check condition Security Indicator SECRITY INDIC OFF/ON Security Horn SECURITY HORN OFF/ON Wireless Buzzer BUZZ RESP SOUND OFF/ON Rear Fog Light Relay R FOG LIGHT RLY ON/OFF Front Fog Light Relay F FOG LIGHT RLY ON/OFF Headlight Relay HEAD LIGHT ON/OFF Taillight Relay TAIL LIGHT ON/OFF Illuminated Entry System ILLUMI OUTPUT OFF/ON