Section 361 (Steering Column Shift Assembly): Removal

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE STEERING COLUMN ASSEMBLY (See REMOVAL ).
REMOVE PARKING LOCK CABLE ASSEMBLY
1. Remove the screw and parking lock cable No. 2.
2. Using a torx socket wrench, remove the 2 screws and parking lock cable No. 1.
3. Remove the spring.
4. Remove the 2 bolts and parking lock cable housing.

Fig 1: Removing Parking Lock Cable Assembly

REMOVE SHIFT LEVER
1. Disconnect the connector.
2. Using a torx socket wrench, remove the torx screw and shift lever.
3. Remove the upper No. 2 steering column cover.
REMOVE SHIFT LEVER HOUSING
Using a torx socket wrench, remove the 3 torx screws and shift lever housing.