LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 429 (Audio System & Visual System) >> Power Point Socket Assembly >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Point Socket Assembly: Replacement

WARNING: This page is about a different car, the 2004 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

COMPONENTS 

  1. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSY (M/T TRANSAXLE) (See  REPLACEMENT  ) 
  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CTR (See  REPLACEMENT  ) 
  3. REMOVE CONSOLE BOX ASSY REAR (See  REPLACEMENT  ) 
  4. REMOVE POWER POINT SOCKET ASSY 
    1. Turn the socket in the circumference direction as shown in Fig 1 , disengage the claw between the socket and the power point socket cover, and push out the socket to the room side.
    2. Align the socket with the notch on the power point socket cover, remove the power point socket assy to the room side.
      Fig 1: Removing Power Point Socket Assy.
      G02925350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL POWER POINT SOCKET ASSY 
    1. Align the socket with the notch on the power point socket cover, push the power point socket assy into as hard as possible and install it.
    Fig 2: Installing Power Point Socket Assy.
    G02925351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL CONSOLE BOX ASSY REAR (See  REPLACEMENT  ) 
scientia non olet · About LEMON Manuals