Torque Specifications
STEERING TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.Lbs |
|---|---|---|---|
| TILT STEERING COLUMN | |||
| Adjusting Nut | See REASSEMBLY | ||
| No. 2 Intermediate Shaft Assembly At Main Shaft Assembly | 36 | 360 | 26 |
| Column Assembly Set Bolt | 21 | 210 | 15 |
| No. 2 Intermediate Shaft Assembly At Steering Intermediate Extension | 36 | 360 | 26 |
| Steering Wheel Set Nut | 50 | 500 | 35 |
| Steering Wheel Pad Set Screw (Torx Screw) | 8.8 | 90 | 78 in..lbf |
| POWER STEERING VANE PUMP | |||
| Front Housing At Rear Housing | 22 | 220 | 16 |
| Oil Pressure Switch | 21 | 210 | 15 |
| Pressure Port Union | 69 | 700 | 51 |
| Suction Port Union Set Bolt | 12 | 120 | 9 |
| PS Vane Pump Assembly At Engine | 30 (43) | 305 (440) | 22 (32) |
| Pressure Feed Tube At PS Vane Pump Assembly | 51.5 | 525 | 38 |
| POWER STEERING GEAR | |||
| Control Valve Self-Locking Nut | 12 | 125 | 9 |
| Rack Housing Cap At Rack Housing | 69 | 700 | 51 |
| Rack Guide Spring Cap Lock Nut At Rack Housing | 32 (44) | 330 (450) | 24 (32) |
| Rack End At Steering Rack | 60 (83) | 615 (850) | 44 (61) |
| No. 1 Rack Housing Bracket At Rack Housing | 61 | 615 | 44 |
| Tie Rod End Lock Nut | 74 | 750 | 54 |
| Turn Pressure Tube At PS Gear Assembly | 27 (29.5) | 270 (300) | 20 (22) |
| Pressure Feed Tube At PS Gear Assembly | 40 (44) | 410 (450) | 29 (32) |
| Return Tube At PS Gear Assembly | 40 (44) | 410 (450) | 29 (32) |
| Steering Intermediate Extension At Control Valve Assembly | 35 | 360 | 26 |
| PS Gear Assembly At Front Suspension Crossmember | 137 | 1,400 | 101 |
| Pressure Feed Tube Clamp Mounting Bolt | 12.5 | 130 | 9 |
| Return Tube Clamp Mounting Bolt | 12.5 | 130 | 9 |
| Stabilizer Bar At Front Suspension Crossmember | 29 | 300 | 22 |
(): For use without SST