Torque Specifications
Charging System Torque Specifications
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Bearing retainer x Drive end frame | 3.0 | 30 | 26 in..lbf | |
| Rectifier end frame x Drive end frame | Nut A | 4.5 | 46 | 40 in..lbf |
| Nut B | 5.4 | 55 | 48 in..lbf | |
| Generator pulley x Rotor | 110.5 | 1,127 | 82 | |
| Rectifier holder x Lead wire of drive end frame | 2.9 | 30 | 26 in..lbf | |
| Voltage regulator x Rectifier end frame | 2.0 | 20 | 17 in..lbf | |
| Voltage regulator x Rectifier holder | 2.0 | 20 | 17 in..lbf | |
| Brush holder x Rectifier holder | 2.0 | 20 | 17 in..lbf | |
| Brush holder x Voltage regulator | 2.0 | 20 | 17 in..lbf | |
| Rear end cover x Rectifier holder | 4.4 | 45 | 39 in..lbf | |
| Plate terminal x Rectifier holder | 3.9 | 39 | 35 in..lbf | |
| Terminal insulator x Rectifier holder | 4.1 | 42 | 36 in..lbf | |
| Generator x Engine | Bolt A | 52 | 538 | 38 |
| Bolt B | 21 | 214 | 16 | |
| Generator wire x Generator | 9.7 | 100 | 85 in..lbf | |
| Wire clip x Generator | 7.7 | 79 | 68 in..lbf | |