Diagnosis & Repair

NOTE: Using Toyota hand-held tester or scan tool, read FREEZE FRAME data. Freeze frame data records engine conditions when malfunction is detected.

For diagnosis and repair procedure, see Fig 1 - Fig 3 .

When access to, or replacement of ECM is necessary, Engine Control Module (ECM) is located behind glove box. See Figure. For ECM connector terminal view, see Figure. For ECT sensor circuit wiring diagram, see Fig 4.

For testing of systems or components, see SYSTEM & COMPONENT TESTING - 4-CYLINDER article. For removal and installation of components, see REMOVAL, OVERHAUL & INSTALLATION - 4-CYLINDER article.

Fig 1: DTC P0115 Diagnostic Procedure (Steps 1-2)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: DTC P0115 Diagnostic Procedure (Steps 3-4)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: DTC P0115 Diagnostic Procedure (Step 5)

Fig 4: ECT Sensor Circuit Wiring Diagram

Fig 5: Locating Splice I2