Torque Specification
TIGHTENING TORQUE SPECIFICATIONS
| Part Tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| STEERING COLUMN | ||||
| Steering Wheel Pad Set Screw (Torx Screw) | 8.8 | 90 | 78 in..lbf | |
| Steering Wheel Set Nut | 50 | 510 | 37 | |
| Intermediate Shaft Assembly at Control Valve Shaft | 35 | 360 | 26 | |
| Intermediate Shaft Assembly at Main Shaft Assembly | 35 | 360 | 26 | |
| Steering Column Assembly Set Nut | 25 | 260 | 19 | |
| Shift Lever Set Bolt | 12 | 120 | 9 | |
| Shift Lever Housing at Column Housing Support | 12 | 120 | 9 | |
| Turn Signal Bracket at Steering Column Housing | 7.5 | 75 | 65 in..lbf | |
| Column Housing Support at Column Tube Assembly | 19 | 190 | 14 | |
| PS VANE PUMP | ||||
| Pressure Feed Tube at Control Valve Housing | 27 (25) | 280 (250) | 20 (18) | |
| Clamp Plate Set Nut | 7.8 | 80 | 69 in..lbf | |
| Pump Assembly Set Bolt | ||||
| A Bolt | 29 (43) | 300 (440) | 22 (32) | |
| B Bolt | 43 | 440 | 32 | |
| Oil Pressure Switch at Union Bolt | 21 | 210 | 15 | |
| Union Bolt at Pressure Feed Tube | 52 | 530 | 38 | |
| Vane Pump Pulley Set Nut | 43 | 440 | 32 | |
| Front Bracket at Rear Bracket | 43 | 440 | 32 | |
| Suction Port Union Set Bolt | 13 | 130 | 9 | |
| Pressure Port Union | 83 | 850 | 62 | |
| Rear Housing Set Bolt | 17 | 170 | 12 | |
| PS GEAR | ||||
| Pressure Feed Tube Clamp Plate Set Nut | 10 | 100 | 7 | |
| Pressure Feed And Return Tubes at Control Valve Housing | 27 (25) | 280 (250) | 20 (18) | |
| Stabilizer Bar Set Bolt | 19 | 190 | 14 | |
| PS Gear Assembly Set Bolt And Nut | 181 | 1,850 | 134 | |
| Turn Pressure Tube Union Nut | 12 (13) | 120 (130) | 9 (9) | |
| Tie Rod End Lock Nut | 74 | 750 | 54 | |
| Rack at Rack End | 60 (83) | 610 (850) | 44 (61) | |
| Rack Guide Spring Cap Lock Nut | 50 (69) | 510 (700) | 37 (51) | |
| Rack Housing Cap | 59 | 600 | 43 | |
| Self-Locking Nut | 25 | 250 | 18 | |
| Control Valve Housing Set Bolt | 18 | 180 | 13 | |
(): For use without SST