Torque Specification
Steering Torque Specifications
| Part tightened | N.m | kgf.cm | ft.lbf | |||
|---|---|---|---|---|---|---|
| STEERING COLUMN | ||||||
| Steering wheel set nut | 50 | 500 | 35 | |||
| Steering wheel pad set screw (Torx screw) | 9.0 | 90 | 78 in..lbf | |||
| Steering column assembly set nut and bolt | 26 | 260 | 19 | |||
| Main shaft assembly x Universal joint No.2 | 35 | 360 | 26 | |||
| Universal joint No.2 x Intermediate No.2 shaft | 35 | 360 | 26 | |||
| Control valve shaft x Intermediate No.2 shaft | 35 | 360 | 26 | |||
| Column hole cover x Body | 2WD | 8.0 | 80 | 69 in..lbf | ||
| Column hole cover No.2 x Column hole cover x Body | 4WD | 8.0 | 80 | 69 in..lbf | ||
| TILT STEERING COLUMN | ||||||
| Tilt steering bolt | 20 | 200 | 14 | |||
| PS VANE PUMP | ||||||
| 2RZ-FE, 3RZ-FE and 5VZ-FE: | ||||||
| Union bolt x Pressure feed tube | 47 | 475 | 34 | |||
| Pressure port union x Pump housing | 83 | 850 | 61 | |||
| Bracket x Pump assembly | 5VZ-FE | 43 | 440 | 32 | ||
| Oil reservoir set bolt | Front | 13 | 130 | 9 | ||
| Rear | 24 | 240 | 17 | |||
| Vane pump pulley set nut | 43 | 440 | 32 | |||
| Oil pressure switch x Pressure feed tube | 5VZ-FE | 21 | 210 | 15 | ||
| Vane pump assembly with bracket set bolt and nut | 5VZ-FE | 43 | 440 | 32 | ||
| Vane pump assembly set bolt | 2RZ-FE, 3RZ-FE | 39 | 400 | 29 | ||
| Rear housing set bolt | 24 | 240 | 17 | |||
| Power steering idle pulley set nut | 39 | 400 | 29 | |||
| PS GEAR | ||||||
| 2WD: | ||||||
| Self-locking nut | 25 | 250 | 18 | |||
| Rack housing cap | 59 | 600 | 43 | |||
| Control valve housing set bolt | 18 | 185 | 13 | |||
| Rack guide spring cap lock nut | 50 (60) | 513(700) | 37(51) | |||
| Rack housing No.2 bracket set bolt | 61 | 620 | 45 | |||
| Rack x Rack end | 60 (83) | 615 (850) | 45(61) | |||
| Tie rod end lock nut | 54 | 550 | 40 | |||
| Turn pressure tube union nut | 12(13) | 122(130) | 9(9) | |||
| PS gear assembly set bolt | 201 | 2,050 | 148 | |||
| Pressure feed tube x Control valve housing | 33(45) | 337 (450) | 24(33) | |||
| Return tube x Control valve housing | 36 (49) | 365 (500) | 26 (36) | |||
| 4WD and Pre runner: | ||||||
| Cylinder end stopper | 59 (78) | 597 (800) | 43 (58) | |||
| Rack guide spring cap lock nut | 51 (69) | 521 (700) | 38(51) | |||
| Rack x Rack end | 76 (103) | 770(1,050) | 56 (76) | |||
| Tie rod end lock nut | 55 | 560 | 41 | |||
| Part tightened | N.m | kgf.cm | ft.lbf | |||
| 4WD and Pre runner: | ||||||
| Turn pressure tube union nut | 23 (25) | 235 (250) | 17(18) | |||
| PS gear assembly set bolt | 167 | 1,700 | 123 | |||
| PS gear assembly set bolt x nut | 191 | 1,950 | 141 | |||
| Bracket x Body | 167 | 1,700 | 123 | |||
| Pressure feed tube x Control valve housing | 33 (45) | 337(450) | 24 (33) | |||
| Return tube x Control valve housing | 36(49) | 365 (500) | 26(36) | |||
| Control valve housing set bolt | 18 | 185 | 13 | |||
| Bearing guide nut | 25 | 250 | 18 | |||
| (): For use without SST | ||||||