Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | See page |
| Accumulated time that the following conditions are met | 20 sec |
| Battery voltage | 11 V or more |
| IAT | -10 °C (14°F) or more |
| Idle | OFF |
| MAF | 6 to 26 g/sec |
| RPM | Less than 2,700 rpm |
| ECT | 50 °C (122 °F) or more |
| Catalyst condition | Warmed up |
| Fuel system status | Closed Loop |
| A/F sensor voltage | 3 to 3.5 V |