Torque Specification

Steering System Components Tightening Torque Specifications

Part tightened			N.m	kgf.cm	ft.lbf
TILT STEERING COLUMN
	Tilt lever lock shaft		9.0	90	78 in..lbf
	Turn signal bracket x Steering column upper tube		7.5	75	65 in..lbf
	Shift lever housing x Column tube assembly		10	100	7
	Shift lever set bolt		11	110	8
	Shift lock solenoid bracket x Shift lever housing		3.4	35	30 in..lbf
	Shift lock switch guide		2.8	29	25 in..lbf
	Universal joint assembly x Main shaft assembly		35	360	26
	Steering column assembly set nut		25	260	19
	Intermediate shaft sub-assembly x Control valve shaft		35	360	26
	Universal joint assembly x Intermediate shaft sub-assembly		35	360	26
	Steering wheel set nut		50	510	37
	Steering wheel pad set screw (Torx screw)		8.8	90	78 in..lbf
POWER STEERING VANE PUMP
	Rear housing set bolt		17	170	12
	Pressure port union		83	850	62
	Suction port union set bolt		13	130	9
	Front bracket x Rear bracket		43	440	32
	Vane pump pulley set nut		44	450	33
	Pressure feed tube x PS vane pump assembly		52	530	38
	Oil pressure switch		21	210	15
	PS vane pump set bolt	A bolt	29 (43)	300 (440)	22 (32)
	PS vane pump set bolt	B bolt	43	440	32
	Pressure feed tube x Pressure feed tube		23 (25)	230 (250)	17 (18)
	Clamp plate set nut		7.8	80	69 in..lbf
POWER STEERING GEAR
	Control valve housing set bolt		18	180	13
	Self-locking nut		25	250	18
	Rack housing cap		59	600	43
	Rack guide spring cap lock nut		50 (69)	510 (700)	37 (51)
	Rack x Rack end		60 (83)	610 (850)	45 (61)
	Tie rod end lock nut		74	750	54
	Turn pressure tube union nut		12 (13)	120 (130)	9 (9)
	PS gear assembly set bolt		181	1,850	134
	Stabilizer bar set bolt		19	190	14
	Pressure feed and return tubes x Control valve housing		28 (25)	290 (250)	21 (18)
	Pressure feed tube clamp plate set nut		10	100	7
	Intermediate shaft sub-assembly x Control valve shaft		35	360	26
	Tie rod end x Steering knuckle		49	500	36
( ): For use without SST