On-Vehicle Repair
- REMOVE AIR CLEANER ASSEMBLY
- DISCONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
- REMOVE DIRECT CLUTCH SPEED SENSOR
- Remove the bolt and direct clutch speed sensor.
- Remove the O-ring from the direct clutch speed sensor.
- INSTALL DIRECT CLUTCH SPEED SENSOR
- Coat a new O-ring with ATF and install it to the direct clutch speed sensor.
- Install the direct clutch speed sensor with the bolt.
Torque: 11 N.m (110 kgf.cm, 8 ft.lbf)
- CONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
- INSTALL AIR CLEANER ASSEMBLY