How To Proceed With Troubleshooting

HINT:

Use these procedures to troubleshoot the power window control system (convertible).

1. VEHICLE BROUGHT TO WORKSHOP 
   1. Go To Next Step. 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See  CUSTOMER PROBLEM ANALYSIS CHECK  ) 
   1. Go To Next Step. 
3. PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
   1. If the fault is not listed on the problem symptoms table, proceed to A.
   2. If the fault is listed on the problem symptoms table, proceed to B.
   1. B: Go to step   5 
   2. A: Go to Next Step. 
4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. Terminals of ECU (see TERMINALS OF ECU )
   2. On-vehicle Inspection (see ON-VEHICLE INSPECTION )
   3. Inspection (see INSPECTION )
   1. Go To Next Step. 
5. ADJUST, REPAIR OR REPLACE 
   1. Go To Next Step. 
6. CONFIRMATION TEST 
   1. END