LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Camry Solara SLE, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (SFI) (3MZ-FE) >> ECM >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control System (SFI) (3MZ-FE): ECM: Replacement

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE RH (See  REPLACEMENT  ) 
  3. REMOVE COWL SIDE TRIM SUB-ASSY RH (See  REPLACEMENT  ) 
  4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 1 (See  REPLACEMENT  ) 
  5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH (See  REPLACEMENT  ) 
  6. REMOVE ECM 
    1. Remove the 2 wire harness clamps.
    2. Disconnect the 5 ECM connectors.
    3. Remove the 2 nuts and ECM.
    Fig 1: Removing ECM
    G02588784Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE ECM BRACKET 
    1. Remove the 2 screws and ECM bracket.
    Fig 2: Removing ECM Bracket
    G02588785Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE ECM BRACKET NO. 2 
    1. Remove the 2 screws and ECM bracket.
      Fig 3: Removing ECM Bracket No. 2
      G02588786Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL ECM BRACKET NO. 2 
    1. Install the ECM bracket with the 2 screws.
      Fig 4: Installing ECM Bracket No. 2
      G02588787Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL ECM BRACKET 
    1. Install the ECM bracket with the 2 screws.
  11. INSTALL ECM 
    1. Install the 2 wire harness clamps.
    2. Connect the 5 ECM connectors.
    3. Install the ECM with the 2 nuts.

      Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf) 

    Fig 5: Installing ECM
    G02588788Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL RH (See  REPLACEMENT  ) 
  13. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 1 (See  REPLACEMENT  ) 
  14. INSTALL COWL SIDE TRIM SUB-ASSY RH (See  REPLACEMENT  ) 
  15. INSTALL FRONT DOOR SCUFF PLATE RH (See  REPLACEMENT  ) 
  16. CONNECT BATTERY NEGATIVE TERMINAL 
  17. INITIALIZE SYSTEM (See  INITIALIZATION  )