Torque Specifications
Torque Specifications
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Lead wire x Repair service starter kit | 10 | 102 | 7 | |
| Starter x Engine | Bolt | 37 | 378 | 27 |
| Nut | 9.8 | 100 | 7 | |
| Commutator end frame x Starter drive housing assy | 6.0 | 61 | 53 in..lbf | |
| Repair service starter kit x Starter drive housing assy | 7.5 | 76 | 66 in..lbf | |
| Battery negative terminal x Battery | 5.4 | 55 | 48 in..lbf | |
| Generator assy x Engine | M12 | 25 | 250 | 18 |
| M14 | 54 | 550 | 39 | |
| Rectifire end frame x Drive end frame (See page 19 - 18) | Nut A | 4.5 | 46 | 39 in..lbf |
| Nut B | 5.4 | 55 | 47 in..lbf | |
| Recrifire holder x Coil lead on rectifire end frame | 2.9 | 30 | 26 in..lbf | |
| Voltage regulator x Rectifire end frame | 2.0 | 20 | 18 in..lbf | |
| Brush holder x Rectifire end frame | 2.0 | 20 | 18 in..lbf | |
| Rear end cover x Rectifire holder | 4.4 | 45 | 39 in..lbf | |
| Plate terminal x Rectifire holder | 3.9 | 39 | 35 in..lbf | |
| Terminal insulator x Rectifire holder | 4.1 | 42 | 36 in..lbf | |
| Generator pulley x Rotor | 111 | 1,125 | 81 | |