Torque Specification

Part tightened		N.m	kgf.cm	ft.lbf
TILT STEERING COLUMN
Adjusting nut		See page SR-19
No. 2 tilt lever lock bolt		5.4	55	48 in..lbf
No. 2 intermediate shaft assembly x Main shaft assembly		28	290	21
Column assembly set bolt		21	210	15
Sliding yoke x No. 3 intermediate shaft assembly		28	290	21
No. 2 intermediate shaft assembly x Sliding yoke		26	290	21
Steering wheel set nut		60	510	37
Steering wheel pad set screw (Torx screw)		8.6	90	78 in..lbf
POWER STEERING VANE PUMP
Rear housing x Front housing		22	220	16
Oil pressure sensor		21	210	15
Pressure port union		69	700	51
Front and rear bracket x Pump housing		44	440	32
Heat insulator and rear stay x Rear housing		44	440	32
Oil reservoir x Pump housing		9.0	90	78 in..lbf
Pump assembly set bolt	Bolt A	44	440	32
	Bolt B	44	440	32
	Bolt C	44	440	32
Pressure feed tube x Pump assembly		41 (44)	420(450)	30(33)
MANUAL STEERING GEAR
Engine hanger set bolt		20	200	15
Rack guide spring cap lock nut		36(49)	365 (500)	26(36)
Rack end x Rack		62 (83)	630(850)	46(61)
Tie rod end lock nut		47	480	35
Engine rear mount bracket set bolt		49	500	36
Engine rear mount bracket x Engine rear mount insulator		64	650	47
No. 3 intermediate shaft assembly x Steering pinion		28	290	21
Manual steering gear assembly set bolt		74	750	54
Front suspension member x Frame	Bolt A	116	1,180	86
Front suspension member x Frame	Bolt B	70	710	52
Engine rear mount insulator x Front suspension member		80	810	59
Lower suspension arm x Steering knuckle		98	1,000	72
Engine hood x Hinge		11	110	8
Tie rod end x Steering knuckle		49	500	36
POWER STEERING GEAR
Engine hanger set bolt		20	200	15
Control valve housing x Rack housing		21	220	15
Rack guide spring cap lock nut		28 (39)	290 (400)	21 (29)
Rack end x Rack		62 (83)	630(850)	46(61)
Tie rod end lock nut		47	480	35
Turn pressure tube x Rack housing		11 (13)	110(130)	8(9)
Engine rear mount bracket set bolt		49	500	36
Engine rear mount bracket x Engine rear mount insulator		64	650	47
Part tightened		N.m	kgf.cm	ft.lbf
No. 3 intermediate shaft assembly x Control valve shaft		28	290	21
PS gear assembly set bolt		74	750	54
Dynamic damper (with rack housing heat insulator) set bolt		18	180	13
Rack housing heat insulator set bolt		35	360	26
Front suspension member x Frame	Bolt A	116	1,180	86
Front suspension member x Frame	Bolt B	70	710	52
Engine rear mount insulator x Front suspension member		80	810	59
Lower suspension arm x Steering knuckle		98	1,000	72
Engine hood x Hinge		11	110	8
Tube clamp		7.8	80	69 in..lbf
Pressure feed and return tube		27 (25)	280 (250)	20(18)
(): For use without SST