Service Data: 2AZ-FE
Service Data - 2AZ-FE Starting & Charging
| Starter assy | ||
| Specified current | 90A or less at 11.5V | |
| Starter relay | ||
| Specified condition | 3 - 5 | 10 kΩ or higher |
| 3 - 5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) | |
| Starter armature assy | ||
| Depth | Standard | 3.1 mm (0.122 in.) |
| Maximum | 3.8 mm (0.150 in.) | |
| Starter commutator end frame assy | ||
| Brush length | Standard | 9.0 mm (0.354 in.) |
| Minimum | 4.0 mm (0.158 in.) | |
| Magnetic switch resistance | Terminal 50 - C | Below 1 Ω |
| Terminal 50 - Switch body | Below 2 Ω | |
| Starter armature resistance | Segments | Below 1 Ω |
| Commutator - Coil core | 1 MΩ or higher | |
| Voltage regulator | Regulating voltage | 13.2 to 14.8 V |
| Standard amperage | 10 A or less | |
| Generator brush holder assy | ||
| Brush length | Standard | 10.5 mm (0.413 in.) |
| Minimum | 4.5 mm (0.177 in.) | |
| Generator rotor assy | ||
| Open circuit | Resistance | 2.3 to 2.7 Ω at 20°C (68°F) |
| Slip ring diameter | Standard | 14.2 to 14.4 mm (0.559 to 0.567 in.) |
| Minimum | 14.0 mm (0.551 in.) | |