LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Air Conditioning >> Automatic System >> Service Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Specifications

AUTOMATIC AIR CONDITIONING SPECIFICATIONS

Application Specification
Compressor Type (1)
Compressor Belt Tension (2)
2.4L 4-Cyl. (3)
3.3L V6
New Belt 160-180 lbs. (72.6-82 kg)
Used Belt (4) 115-135 lbs. (52-61 kg)
Compressor Oil Capacity (5) 4.1 ozs.
Condenser Oil Capacity (5) (1)
Evaporator Oil Capacity (5) (1)
Refrigerant (R-134a) Capacity 21.2-24.7 ozs.
System Operating Pressures (6)
High Side 199-228 psi (14-16 kg/cm2 )
Low Side 21-36 psi (1.5-2.5 kg/cm2 )
(1) Information is not available from manufacturer.
(2) Use belt tension gauge for checking compressor belt tension.
(3) Automatic belt tensioner is used. Adjustment is not required.
(4) Used belt is a belt that has been in operation at least 5 minutes.
(5) Use ND-OIL 8 refrigerant oil or equivalent.
(6) With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 1500 RPM, blower switch in HI position and temperature control dial in COOL position.
scientia non olet · About LEMON Manuals