Torque Specification
TORQUE SPECIFICATION
| Part Tightened | N.M | Kgf.Cm | Ft.Lbf |
|---|---|---|---|
| Bearing Retainer At Drive End Frame | 3.0 | 31 | 27 In.Lbf |
| Rectifier End Frame At Drive End Frame Nut A | 4.5 | 46 | 40 In.Lbf |
| Rectifier End Frame At Drive End Frame Nut B | 5.4 | 55 | 48 In.Lbf |
| Generator Pulley At Rotor | 110.5 | 1,125 | 81 |
| Rectifier End Frame At Brush Holder, Voltage Regulator | 2.0 | 20 | 18 In.Lbf |
| Rectifier Holder At Coil Lead On Rectifier End Frame | 2.9 | 30 | 26 In.Lbf |
| Rear End Cover At Rectifier Holder | 4.4 | 45 | 39 In.Lbf |
| Plate Terminal At Rectifier Holder Nut | 4.4 | 45 | 39 In.Lbf |
| Plate Terminal At Rectifier Holder Bolt | 3.9 | 39 | 35 In.Lbf |
| Terminal Insulator At Rectifier Holder | 4.1 | 42 | 36 In.Lbf |
| Generator At RH Engine Mount Bracket | 25 | 255 | 18 |
| Generator At Cylinder Block | 54 | 550 | 40 |