Input Speed Sensor: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery negative cable.
Disconnect input speed sensor connector. See Fig 1 .
Unscrew and remove input speed sensor. See Fig 2 .
Inspect speed sensor O-ring and replace if necessary. See Fig 3 .

Fig 1: Disconnecting Speed Sensor Connectors

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Input Speed Sensor

Courtesy of CHRYSLER CORP.

Fig 3: Locating Input Speed Sensor O-Ring

Courtesy of CHRYSLER CORP.