Section 471 (Front Wiper System & Washer System): Removal
WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
A bolt without a torque specification is shown in the standard bolt chart. (See SPECIFIED TORQUE FOR STANDARD BOLTS )
- REMOVE WIPER ARM HEAD CAPS AND FRONT WIPER ARMS
- REMOVE COWL TOP VENTILATOR LOUVER AND HOOD TO COWL TOP SEAL
- REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY
- Disconnect the connector, then unfasten the 3 bolts.
- Remove the wiper motor and link assembly.